M10 · 108
- Power
- 400 to 445Wp
- Efficiency
- 22.79% up to
- Cells
- 108half-cut · M10 182 mm

65,000+ square metres of solar manufacturing on the Rajkot Jamnagar Highway.

Solar modules, encapsulant films and EPC solutions, all from one campus.
N-type TOPCon, half-cut, sealed in glass on both sides.
PIX 156 HT 650 D · N-type TOPCon · bifacial dual glass
2 mm low-iron glass with an anti-reflective coating, over an encapsulant made in our Rajkot plant that seals the cells in and keeps moisture out.
Half-cut M10 N-type TOPCon cells with 16 busbars, wired as two halves of 13 by 6.
A second sheet of low-iron glass turns ground light into power (up to 80% bifaciality), held in a frame rated for 5400 Pa of snow load.
Three layers, one module, made in Rajkot.
At most 1% loss in the first year, then 0.40% a year. Backed by a 12-year product warranty.

The film, the modules and the quality checks are all made in one place, so every panel that leaves carries the same standard.
1.6 GW of modules a year, with AI-controlled quality checks from the first cell to the last frame.
Automated gantries move every module from one station to the next.

EVA and POE encapsulant, with 1 GW of annual capacity.

Melt flow, heat press and UV tests in our own quality lab.

Our team in Rajkot.






Reach out to our solar experts to explore solutions tailored to your energy needs. Let’s work together to create a cleaner, greener and more sustainable future.